POWX1195
EN
Copyright © 2016 VARO NV
P a g e
|
3
www.varo.com
HAMMER DRILL 1500W
POWX1195
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
It is not designed for commercial use.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1.
Dust cap
2.
Fastening sleeve
3.
Auxiliary handle
4.
Grease cap
5.
Hammer stop
6.
Drill stop
7.
AVS system (Anti Vibration System)
8.
On/off switch
9.
Handle
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
Hammer drill 1500W
Auxiliary handle
Dust cap
Spanner
Grease tube
- 3 SDS drills Ø8-10 & 12 x 150mm
- SDS point chisel: 250mm
- SDS flat chisel: 14 x 250mm
When parts are missing or damaged, please contact your dealer.
