20
Installing PowerLeap™ PL/586-133
PowerLeap™ Installation Guide
3
Close the ZIF socket by gently pushing the sidebar lever down until it locks into
place.
Make sure that the processor upgrade is positioned in the center of
the socket. When aligned correctly, one row of empty pin holes will
show on each side.
Connecting the Cooling Fan to a Power Source
After installing the processor upgrade, connect the optional cooling fan to your
computer’s power supply.
Completing Installation
To complete the installation, replace the cover of your computer, reconnect the cables,
and turn on the computer. If the computer does not boot, refer to the “Troubleshooting”
section later in this guide.
Because PowerLeap™ does not require any software drivers, there is no software
installation to perform. However, we recommend that you run the Landmark System
Speed Test to compare the performance increase provided by PowerLeap™. For details,
see “Running the Landmark System Speed Test” later in this guide.
