PowerLand PD210E, Owner'S Manual, Page: 24 / 36

20
Oil capacity:
1 .16 US qt (1.1L 0.97 imp qt)
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is comp8tible with the environment. We suggest
you take it in a sealed container to your local service station or recycling center for reclamation. Do
not throw it in the trash or pour it on the ground, or down a drain.
Air Cleaner Service
A dirty air cleaner will restrict air flow to the carburetor. To prevent carburetor malfunction, service
the air cleaner regularly. Service more frequently when operating the generator/welder in extremely
dusty areas.
NOTICE
: Never run the generator/welder without the air cleaner. Rapid engine wear will result.
1. Unsnap the air cleaner cover clips, remove the air cleaner cover, and remove the element.
2. Wash the element in a solution of household detergent
and warm water, then rinse thoroughly, or wash in
nonflammable or high flash point solvent. Allow the
element to dry thoroughly.
3. Soak the element in clean engine oil and squeeze out
the excess oil. The engine will smoke during initial
start-up if too much oil is left in the element.
4. Reinstall the air cleaner element wand the cover.