Maintenance & Repair (cont’d)
45
foam element should be wet but not dripping.
Note: DO NOT twist or wring out the foam element when
squeezing, this could cause it to tear.
f)
Install the foam element.
g)
Install the air filter case cover in its original position and
tighten the screw.
h)
Install the side over and tighten the screws.
Spark plug cleaning and replacement
a)
Remove the cover screws 1 and take off the left side cover 2.
b)
Remove spark plug cap 3. Insert the spark plug wrench onto
the spark plug 4. Slide the handlebar 5 through the hole in the
spark plug wrench 4 and turn it counter clockwise to remove
the spark plug.
c)
Check for discoloration and remove any carbon build up. The
porcelain insulator around the center electrode of the spark
plug should be a medium-to-light tan color.
d)
Check the spark plug type and gap a. The gap should be
measured with a wire thickness gauge.
Standard Spark Plug:
BPR6ES/BP6ES (NGK)
F7RTC/F7TC
Spark Plug Gap:
0.6-0.7mm (0.024-0.028in)
