background image

Limited Warranty 

 

 

 

55 

Dear Valued Customer: 
 
The Powerhorse Product you just purchased is built with the finest material and craftsmanship.  Use this product properly and enjoy 

the benefits from its high performance.  By purchasing a Powerhorse product, you show a desire for quality and durability.  Like all 
mechanical equipment this unit requires a due amount of care.  Treat this unit like the high-quality piece of machinery it is.  Neglect 
and  improper  handling  may  impair  its  performance.    Please  thoroughly  read  the  instructions  and  understand  the  operation  before 
using your product.  Always contact Powerhorse Product Support at 1-866-443-2576 prior to having any service or warranty work 
performed, as  some services performed by parties other than Powerhorse approved service centers may void this warranty.  This 
warranty is in lieu of any other warranty expressed or implied and Powerhorse assumes no other responsibility or liability outside that 

expressed within this warranty. 

Limited Warranty 

Powerhorse shall warranty any

 

piece of  equipment manufactured, or parts of equipment manufactured, to be  free from defects  in 

material or workmanship for a period of: 

 

Powerhorse Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

750133 

2 years from date of purchase by user 

90 days from date of purchase by user 

 

“Consumer use” means personal residential household

 and/or recreational 

use by a consumer. “Commercial use” means all ot

her uses, 

including use for commercial, income producing, primary power, off grid power, or rental purposes or when purchased by a business. 
 
This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the responsibility of 

the buyer), is non-transferable, and covers parts and labor.  Parts will be replaced or repaired at no charge, except when the equipment 
has failed due to lack of proper maintenance.  If a part is no longer available, the part  may be replaced with a similar part of equal 
function.  Any misuse, abuse, alteration or improper installation or operations will void warranty.  Determining whether a part is to be 
replaced or repaired is the sole decision of Powerhorse.  Powerhorse will  not provide for replacement of complete products due to 
defective parts.  Any costs incurred due to replacement or repair of items outside of a Powerhorse approved facility is the responsibility 
of the buyer and not covered under warranty. Transportation costs to and from service center is the responsibility of the customer.   
 

In addition to the normal warranty, Powerhorse shall warrant any normal wear item from defects in material or workmanship for a period 
of 90 days from the date of purchase by user.  Normal wear items include, but are not limited to, filter elements and electrical brushes. 
 
This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts of God, 
applications not approved by Powerhorse in writing, corrosion caused by chemicals, use of replacement parts which Do not conform to 

manufacturer’s specifications, damage to accessory parts such as starting batteries,

 

damage related to rodent and/or insect infestation 

and damage caused by vandalism.  Additional exclusions: loss of running time, inconvenience, loss of income, or loss of use, including 
any implied warranty of merchantability of fitness for a specific use.  Also, Outdoor Power Equipment needs periodic parts and service 
to perform well, and this warranty does not cover instances when normal use has exhausted the life of a component or the engine.   
 
This  warranty  does  not  cover  any  personal  injury  or  damage  to  surrounding  property  caused  by  failure  of  any  part.  Repair  or 
replacement of parts does not extend the warranty period. 

 
The engine warranty is covered under the same terms and conditions as outlined above. Normal engine maintenance such as spark 
plugs, air filters, adjustments, fuel system cleaning and obstruction due to build up is not covered by this Powerhorse warranty.   
 
Tel: 1-866-443-2576 
 
Website: www.northerntool.com 

 
Please fill in the following information and have it on hand when you call in on a warranty claim. 
 
Customer Number: ______________________________________________________________ 
 
Date of Purchase: _______________________________________________________________ 

 
Powerhorse Serial Number: _________________________________________________________ 
 
Item Number: __________________________________________________________________

Summary of Contents for 750133

























































Reviews: