Operating instructions
The SensorSwitch
for the PowerBox “Competition” and “Champion”
Page 1: ...Operating instructions The SensorSwitch for the PowerBox Competition and Champion ...
Page 2: ... be switched using the two other push buttons I and II This method of switching enables you to check each power circuit or battery individually This is done by switching on only one battery green LED on the switch glows check by glancing at the corresponding LED chain whether and to what extent the battery voltage collapses when you stir the sticks If everything is in order press the SET button ag...
Page 3: ...t is very well protected from the effects of vibration the switch should always be mounted in a part of the model relatively low in vibration Please note that the GRP fuselage sides of a large power model are not suitable as they are always subject to considerable vibration You can remedy the situation by cutting a ply plate 2 3 mm thick about 3 cm larger than the switch aperture and gluing it in ...
Page 4: ...e of your model Accessories 2 retaining screws Installation template Order No 6500 SensorSwitch black 6505 SensorSwitch grey Donauwörth July 2003 Your Modellbau Deutsch Team PowerBox Systems Germany Modellbau Deutsch Hindenburgstraße 33 86609 Donauwörth Tel 49 0906 22559 Fax 49 0906 22459 E Mail info powerbox systems com www powerbox systems com ...
