PLEASE NOTE:
*PowerBase Industrial (HK) Ltd. will not be responsible for any
personnel loss and/or injury if the defect was caused by misuse or
mishandling by the user in any way.
USER MANUAL
Congratulations to your purchase of the outstanding PowerBase C-514 Multi
Functional Output CHARGER. This manual will help you to understand how
to operate this Charger and Batteries.
FEATURES OF C-514 RAPID CHARGER
- International Voltage 100~240V.
- 2 or 4 AA and AAA Ni-MH batteries can be charged.
- Auto Dual Channels.
- Red & Green LED Indicator.
- Automatic batteries fully charge cut-off.
- C-514 can be used in indoor by AC outlet or outdoor 12V DC Car Adaptor.
- Possess reverse polarity protection.
C-514
Multi Functional Charger
C-514
*C-514 Charger is designed to charge 2 or 4 AA / AAA sizes Ni-MH
batteries. Please refer to the combinations below;
(1) For 2 or 4 AA / AAA size Ni-MH Cells.
Note: Charger can only perform either " Charging " or " Output " function.
It cannot perform both functions at the same time.
CAUTION
1.
Open the cover when charging process is beginning. Mainly
for reducing any heat generated inside the charger.
2.
Do NOT recharge Ni-MH & Ni-Cd rechargeable batteries at
the same time.
3. This product is designed for Ni-MH rechargeable batteries
only. To avoid personal injury and damage, do not charge any
primary alkaline, zine chloride, or zinc carbon type batteries.
4. Do not expose the charger to rain or moisture.
5. Do not operate the charger with using an extension cord.
6. Do not use the charger if it has received a sharp blow, been
dropped, or damaged in anyhow
7. To reduce risk of shock, disconnect the AC power source(AC
adaptor) from outlet before attempting any cleaning of the
charger.
8. Do not charge a leaking, corroded or dead battery.
9. Do not attempt to repair charger by yourself. When service or
repair is required, contact qualified service personnel.
10. Do not try to disassemble the charger.
11. Store the charger in a cool and dry place when not in use. Keep
away from children.
CHARGER C-514 SPECIFICATION :
International Voltage
Operation Temperature
Termination Method
Trickle Charge
Charging Current
Battery Type / Size
Switching : 100~240V 50~60Hz
12V DC Car Adaptor
800mA x 2 or 4 AA
800mA x 2 or 4 AAA
Trickle current
-10
℃ ~
40
℃
Ni-MH AA & AAA Batteries
Output Power
5V-5.4V , 500mA
Minus Delta V (-
△V
)
For iPhone & iPod series, mobile phones,
game players (PSP/NDS)
(USB plug)
* The charging time is only for general reference. For detail of different charging time require,
please see the PowerBase battery specification and contact PowerBase for the latest information.
Ni-MH AA
Ni-MH AA
2500 mAh
2300 mAh
1000 mAh
3 hours
2.5 hours
1.2 hours
Ni-MH AAA
Battery Charge Time :
Chemistry
& Size
*Charging Time
(Approximate)
Battery
Capacity
1
CHARGING OPERATION
1. Switch the button to “Charger” position.
Connect DC12V power outlet to :
- AC power adaptor
- Car adaptor
Switch the button to the “CHARGER”
mode when charging. The Green LED
light will stay on to indicate the charger
in standby state.
3. Indications of RED and GREEN LED Light.
Red LED Light - will turn on to indicate the
charger is charging the batteries.
Green LED Light - will stay on when the
charger is in standby stage, without battery.
- will also turn on when the batteries are fully
charged.
2. Select the type of batteries to be charged - AA
or AAA size. Place 2/4 pieces AA or AAA size
batteries for charging process.
*
Open the cover during charging. It helps to
reduce the high temperature created during the
charging process.
* When batteries are fully charged, remove the
AC adaptor/ car adaptor from the charger and
prepare for the output process.
Keep the cover open when charging
