18
Stopping:
A. Release the trigger.
B. To switch the machine off, set the On/Off switch to OFF.
C. Close the water inlet valve
Attention!
Risk of machine damage!
Never operate the machine without water inlet as dry running may
damage the pump. Use a water filter if the inlet water is contami-
nated.
Working with the Electric High pressure
washer
Risk of fatal injury!
Use special care when cleaning tyres. Vehicle tyres/tyre valves
may become damaged or burst when handled improperly. First
signs of damage included discolorations on the tyre. Damaged
vehicle tyres/tyre valves pose a life-threatening risk. Keep the jet
at a distance of at least 30 cm!
WARNING! Risk of fatal injury!
The high-pressure jet may be dangerous when handled im-
properly. The jet may not be directed towards living beings
(persons, animals), live equipment or the machine itself.
In case of contact with detergents: rinse with an abundance of
clean water
Turn on the pressure washer. Pull trigger to operate unit. The liquid
detergent will automati¬cally mix with water, and be discharged
through the nozzle. Apply detergent to a DRY work surface, from
bottom to top.
Allow detergent to remain on the surface for a short time before
rinsing. Do not allow detergent to dry on surface
Rinse with clean water under high pressure. On a vertical surface,
rinse from the bottom up, then rinse from the top down to avoid
streaking. Hold nozzle 6-8” (15-20 cm) from the work surface, at a
45° angle.
When you have finished using the detergent injection system, fill
detergent bottle with clean water. Siphon water at low pressure for
one minute, so that all detergent is flushed through system. Re-
move detergent bottle, and rinse it until it is thoroughly cleaned
