8
MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
8.1
REMOVE THE CHUCK
The chuck may be removed and replaced by a new one.
NOTE
Note: before remove the chuck, lock the switch trigger
by placing the direction of rotation selector in center
position and remove the battery pack.
• Lossen the chuck jaws securely and insert a cross
screwdriver into the chuck of the drill to remove the
screw in a clockwise direction.
• The chuck body can now be unscrewed by hand in
a counterclockwise direction.
8.2
RETIGHTEN A LOOSE CHUCK
• Aline the chuck hole to the drill spindle and tighten
the chuck in a clockwise direction until the chuck
engages completely with a continuous click. At this
time, the chuck jaw is closed.
• Use a dexterous strength to loosen the chuck jaw
counterclockwise. Aline the screw with the hole of
spindle and insert a screwdriver into the chuck to
tighten the crew counterclockwise.
8.3
CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
9
TECHNICAL DATA
Voltage
20 V
No Load Speed
0-650 RPM
Clutch
10 Pos Drill
Torque
150 in.lb./17 N.m
Weight without battery
0.81 kg/1.79 lb
Battery model
BAP series
Charger model
CAP series
10
LIMITED WARRANTY
TA
9
English
EN
TOOL WARRANTY
YEAR/ANS/AÑOS
GARANTIE DE
L’OUTIL
HERRAMIENTA
Powerworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Powerworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1.Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2.The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3.Normal wear, except as noted below;
4.Routine maintenance items such as lubricants, blade
sharpening;
5.Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-855-470-2181.