Power works P24IN, Operator'S Manual

Page: 5 / 125

Item Temperature
Charger operation tempera-
ture range 39°F (4°C) - 104°F (40°C)
Battery storage temperature
range 32°F (0°C) - 113°F (45°C)
Battery discharging tempera-
ture range 32°F (0°C) - 113°F (45°C)
6 TROUBLESHOOTING
Problem Possible cause Solution
The inflator does
not work.
The fan has stop-
ped working to
protect internal
circuits.
Turn off the infla-
tor, wait for the
tool and battery to
cool down, then
start the tool
again.
The battery pack is
out of power. Charge the battery
pack.
The machine
smokes during op-
eration.
The machine has
damage.
1. Immediately
stop the ma-
chine.
2. Remove the
battery pack.
3. Contact the
service center.
7 WARRANTY
(The full warranty terms and conditions can be found on
Powerworks website)
The Powerworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
8 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Inflator
Model: PAM301
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the provisions of the following
other EC-Directives:
• 2006/42/EC
• 2014/30/EU
• 2011/65/EU & (EU)2015/863
• 2000/14/EC
Furthermore, we declare that the following (parts/clauses of)
European harmonised standards have been used:
EN 62841-1, EN 1012, EN ISO 12100, EN 55014-1, EN
55014-2,EN ISO 3744,IEC 62321-3-1, IEC 62321-4, IEC
62321-5, IEC 62321-6, IEC 62321-7-1, IEC 62321-7-2, IEC
62321-8
Conformity assessment method to Annex VI Directive
2000/14/EC.
Measured sound power level L
WA
: 94 dB(A)
Guaranteed sound power lev-
el L
WA.d
: 97 dB(A)
Place, date:
Malmö Signature: Ted Qu, Quality Di-
rector
02.02.2022
6
English
EN