Power works CRM401, Operator'S Manual

Page: 5 / 128

• Clean the housing and the plastic components with a
moist and soft cloth.
6 TECHNICAL DATA
Voltage 24 V
No Load Speed 4,500 min
-1
Blade diameter 184 mm
Weight without battery 3.35 kg
Max cutting depth at 0º 63 mm
Max cutting depth at 45º 43 mm
Battery model P2448B2 / P2448B4 /
P2448B6 and other BAM
series
Charger model P2448C and other CAM ser-
ies
Measured sound pressure
level 84.6dB(A), K
pA
= 3 dB(A)
Measured sound power level 95.6 dB(A), K
wA
= 3 dB(A)
Vibration < 2.5 m/s
2
, K = 1.5 m/s
2
The recommended ambient temperature range:
Item Temperature
Appliance storage tempera-
ture range 32°F (0°C) - 113°F (45°C)
Appliance operation temper-
ature range 32°F (0°C) - 113°F (45°C)
Battery charging temperature
range 39°F (4°C) - 104°F (40°C)
Charger operation tempera-
ture range 39°F (4°C) - 104°F (40°C)
Battery storage temperature
range 32°F (0°C) - 113°F (45°C)
Battery discharging tempera-
ture range 32°F (0°C) - 113°F (45°C)
7 WARRANTY
(The full warranty terms and conditions can be found on
Powerworks webpage)
The Powerworks warranty is 3 years on the product, and
2 years on batteries (consumer/private usage) from the date
of purchase. This warranty covers manufacturing faults. A
faulty product under warranty might be either repaired or
replaced. A unit that has been misused or used in other ways
then described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase
in order to claim for warranty, together with the proof of
purchase (receipt).
8 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Circular saw
Model: CRM401
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2011/65/EU & (EU)2015/863
• 2014/30/EU
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
• EN 62841-1; EN 62841-2-5; EN 55014-1; EN 55014-2;
IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC
62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8
Place, date: Malmö, 02.02.2020 Signature: Ted Qu,
Quality Director
7
English
EN