Power Wheels Barbie K0451 Owner'S Manual With Assembly Instructions Download

Page: 1 / 20

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Assembly tool (included)

and Phillips Screwdriver (not included). Tool needed to access battery

compartment: Slotted screwdriver (not included)

Use only with a Power Wheels

6 Volt (4.0 Amp/Hr.) Rechargeable

Battery with Built-in Thermal Fuse and a Power Wheels

6 Volt

(4.0 Amp/Hr.) Charger (both included).

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Assembly tool (included)

and Phillips Screwdriver (not included). Tool needed to access battery

compartment: Slotted screwdriver (not included)

Use only with a Power Wheels

6 Volt (4.0 Amp/Hr.) Rechargeable

Battery with Built-in Thermal Fuse and a Power Wheels

6 Volt

(4.0 Amp/Hr.) Charger (both included).

Owner's Manual

with Assembly Instructions

For Model K0451

Owner's Manual

with Assembly Instructions

For Model K0451

Product features may vary from the picture above.

ATV

Lil’ Trail Rider

Summary of Contents for Barbie K0451





















Search results

Summary of Contents for Barbie K0451

Reviews:

Related manuals for Barbie K0451

Brands by name

Popular brands

Power Wheels Barbie K0451, Owner'S Manual With Assembly Instructions

Search results

Summary of Contents for Barbie K0451

Reviews:

Related manuals for Barbie K0451

Brands by name

Popular brands