Page 46
6.2
–
CONNECTIVITY DEVICES
To connect to a device, select the appropriate connectivity function from a profile. If the connectivity function is
paired to a device, and the device is linked to the function, then it attempts to connect to the device via Bluetooth.
The Bluetooth connection status indicator shows when the Bluetooth connection between the LiNX system and the
user's device is:
Disconnected
Connecting
Connected
If the Bluetooth fails to connect, the status reverts to disconnected. To attempt to connect again, reselect the
connectivity function from the profile (that is: deselect it, and then reselect it).
Figure 90 : Select a mouse mover
connectivity card from a profile
If a connectivity card in the profile has not been configured fully, or is subject to
an error, it is classed as inoperable. An inoperable card is identified by an orange
chevron-like border, with an error icon indicating the type of error. (See figure 92)
There are a number of reasons that a connectivity card is inoperable. These are:
•
the
function's primary input is missing
•
there are
hardware errors from the Bluetooth module;
•
there is
no device linked;
•
Bluetoot
h has been disabled.
Figure 91 : Operable function
Figure 92 : Imperable function
