CF(M)-3K/2K-12 SUPERCOMBI USER’S GUIDE
16
3.4 Match the Battery and Current
For charging safety, the "maximum charging current" of the SuperCombi
should match the charge current recommended by the battery factory to avoid
the risk of damage to the battery due to the mismatch of charging current.
Note that any accidental loss or damage caused by the mismatch of
charging current, battery damage, is not within our responsibility!
4. Basic Settings
Note: Before setting, make sure that the Rocker Switch is in the center off
position as shown in the following figure. Otherwise, it will damage the battery.
Fig 9. Turn off the Rocker Switch
4.1 Battery Type
According to the type of battery installed, the customers need to select the
corresponding battery type by turning the “Battery Type” knob (see Fig.10)
according to the battery information in the following table.