Power Products GUARDIAN S6-ATS, Instructions For Use Manual

Page: 90 / 154

87
Englis
h
8
Once the oil is replaced place the oil filling hole cap again.
NOTE: Never fill scarce nor excessive oil level.
NOTE: Never use old, dirty or bad oils. Do not use oil if you don't know its
grade and quality. Do not mix different types of oils.
IMPORTANT:
In order to comply with environmental requirements, the used oil
must be placed in a sealed container and taken to the service station for recycling.
Do not discard it on the trash and do not spill on the floor.
11.2 Air filter maintenance
NOTE: A dirty air filter will restrict the air flow in the carburetor, which will
cause incorrect combustion resulting in serious problems for the engine. Clean the
filter regularly according to the maintenance plan in this manual and with more
frequency in dusty areas.
NOTE: Never start the generator without the air filter, otherwise it will cause a
rapid engine abrading.
WARNING: Do not use low ignition point gasoline or solvents when cleaning
the filter. They are flammable and explosive under certain conditions.
1 Open access door for maintenance
2 Release the 90º elbow and open the clips that secure the air filter cover.
OIL FILLING CAP
MAXIMUM LEVEL
OIL FILLING HOLE
MAXIMUM LEVEL
OIL FILLING CAP