Power Products GUARDIAN S6-ATS, Instructions For Use Manual, Page: 77 / 154

74
Englis
h
8.4 programming the automatic mode
The battery is extremely important to start in automatic mode, before programming
the equipment check that the battery is the correct and is charged.
1 Turn the gasoline valve to the "ON" position.
3 Turn the start up key to the "ON" position.
4
Check that the general
network is connected to the
terminals
" IN MAIN
POWER " of the control
panel and that there is
voltage. Electricity passes
through the generator and
goes
out through
" ELECTRICAL OUTLET ".
OUTLET
230V
INLET
NETWORK 230V