Power Plus POWX1110, Manual

Page: 1 / 10

POWX1110
EN
Copyright © 2015 VARO
P a g e | 1
www.varo.com
1 APPLICATION .................................................................................. 3
2 DESCRIPTION (FIG. A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1 Work area ................................................................................................................ 4
5.2 Electrical safety ....................................................................................................... 4
5.3 Personal safety ....................................................................................................... 4
5.4 Power tool use and care ......................................................................................... 5
5.5 Service ..................................................................................................................... 5
6 ADDITIONAL SAFETY WARNINGS FOR PLANERS .................... 5
7 ADJUSTMENTS/SETTINGS ............................................................ 6
7.1 Remove the blades (Fig. 1) ..................................................................................... 6
7.2 Install the blades (Fig. 2) ........................................................................................ 6
7.3 Setting the planing depth (Fig. 3) ........................................................................... 6
7.4 Mounting and setting the parallel guide (Fig. 4) .................................................... 6
8 OPERATION ..................................................................................... 6
8.1 Switching on and off (Fig. 5) .................................................................................. 6
8.2 Drive belt replacement (Fig. 6a, 6b) ....................................................................... 6
8.3 Planing ..................................................................................................................... 7
8.4 Rebating (Fig. 7) ...................................................................................................... 7
8.5 Edge chamfering (Fig. 8) ........................................................................................ 7
8.6 Dust extraction ........................................................................................................ 7
9 CLEANING AND MAINTENANCE ................................................... 8
9.1 Cleaning................................................................................................................... 8
10 TECHNICAL DATA .......................................................................... 8
11 NOISE ............................................................................................... 8
12 SERVICE DEPARTMENT ................................................................ 8
13 STORAGE ........................................................................................ 8
14 WARRANTY ..................................................................................... 9