Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 63 / 170

Product Description FMP 16 9-3
Document number: 036972.fm
Revision: B
Product Description FMP 16
9.2.5 Other technical data
Protection:Short circuit proof
Automatic current limiting
Selective shut down of modules at excess output voltage
Thermal protection reduces the output power at environmental temp. above
maximum level. Shut down at >app 75
o
C with an automatic restart
Input over-voltage disconnection at >275VAC with automatic reset at <260VAC
Alarms:High output voltage / shut down
Low voltage / module failure
Each alarm has a common LED indicator on the front panel
Enclosure:IP 20
Storage:-60 to +85°C
Cooling:Fan cooled (front to back), speed controlled and alarmed
9.3 Operation
FMP 16 has status indicators that is located on the front panel of the module. The output voltage is
adjusted from the controller.
There are three LEDs situated on the rectifier's front panel, which indicate the operating condition of the
rectifier.
Figure 9-1 Front view of FMP 16
FMP 16 has LED indicators as follows:
GREEN
Power ON
YELLOW
Thermal protection. Communication failure (flashing).
RED
Module failure / high output voltage / shutdown.