Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 28 / 170

6-2 PODS 16.48-16000 1940 HEX
Document number: 039160.fm
Revision: A
Installation guide
6.1 Site requirements
The site should be suitable and ready for the power supply. If it is not or you are unsure about this, contact
your supervisor before continuing. Check, using a spirit level, that the site is level.
6.1.1 AC Power source requirements
Note! This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
6.2 Installation procedure
6.2.1 Unpacking
Check that the equipment received is in accordance with the packing list. Ensure that the cabinet and the
equipment have not been damaged during transportation.
Contact Power-One if any parts are missing or damaged, and correct any problems before continuing.
6.2.2 Tools and parts required
The following tools are required for a safe installation of the system:
z
Anti-static hand strap
z
Socket wrench, insulated
z
Screwdriver set, flat, insulated
z
Screwdriver set, torx, insulated
z
Screwdrivers, pozidrive (cross head), sizes 1, 2, and 3, insulated
z
Torque spanner (for battery connection), insulated
z
M12 bolts for cabinet base
WARNING! HIGH LEAKAGE CURRENT. ENSURE EARTH IS CONNECTED
BEFORE CONNECTING MAINS SUPPLY.
WARNING! PRIOR TO INSTALLING MAINS CABLING, ENSURE THAT THE
SYSTEM IS ISOLATED FROM ALL AC MAINS SUPPLIES.
WARNING! ONLY QUALIFIED ELECTRICIAN MAY CARRY OUT THE MAINS
INSTALLATION
WARNING! USE ONLY SINGLE-ENDED, FULLY INSULATED TOOLS: SHAFTS
OF SCREWDRIVERS ETC.; SHOULD BE INSULATED.