Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 167 / 170

Customer AC service outlet - Installation procedure J-5
Document number: 039248.fm
Revision: B
Customer AC service outlet - Installation procedure
J.1 Scope and purpose
The purpose of this document is to give a clear instruction in the connection of an AC service outlet for
PODS 16.48-16000 1940 HEX.
To ensure the continous supply of the loads from batteries, it is of vital importance to follow this procedure
closely.
The reader must READ AND UNDERSTAND allwarnings and cautions in this manual before starting.
WARNING! USE INSULATED TOOLS.
Figure J-1 Insulated tools.
J.2 Safety precautions
It is possible to mechanically damage the units. To avoid this you must follow the approved assembly and
installation methods described in the relevant sections.
WARNING! IF ONLINE ADJUSTMENTS HAS TO BE MADE, USE EXTREME
CAUTION AND RESPECT
WARNING! ONLY TECHNICAL STAFF WITH THE NECESSARY EXPERIENCE
AND KNOWLEDGE, WITH REGARD TO THE POWER SUPPLY SUPPORT SYSTEM
AND ITS BATTERIES, WHO HAVE COMPLETED THE APPROVED TRAINING TO
THIS SYSTEM INSTALLATION MAY CARRY OUT THIS INSTALLATION. IT IS
IMPORTANT TO FOLLOW ALL SAFETY REGULATIONS.
CAUTION! Care must be taken when installing this system. The units can be
damaged and can cause damage if not handled with care. Pay particular attention
to the order in which units are installed.