Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 14 / 170

4-2 PODS 16.48-16000 1940 HEX
Document number: 039159.fm
Revision: B
System description PODS 16.48-16000 1940 HEX
4.1 General
PPS 16 modular DC power cabinet systems are designed to meet rigid telecom applications with very high
reliability and flexibility for future expansion. This cabinet power solution provides rectification, system
management and power distribution while maintaining high reliability and offering flexibility for future
expansion. The PPS 16 Power Systems are based on hot-swappable rectifier modules (FMP 16.48) with
output power available at 1600W per module. Systems are also based on fan cooling rectifiers and it is
therefore important that the ventilation panels are kept free from dust and obstructions that may prevent the
air circulation.
System management is accomplished through messages and alarms displayed on the system controller’s
(PCS) LCD screen and can also be displayed remotely via the PC-based PowCom™
1
software package.
Note! Normally rectifier modules are installed in the cabinet at shipment, but in some particular cases
rectifier modules are shipped separately.
Note! Before Commissioning and Maintenance are carried out a PC with PowCom installed must be
connected to the RS232 contact.
1. Communication program for remote control of the power supply system