manualshive.com logo in svg

Power One PODS 16.48-16000 1940 HEX, Instruction Manual, Page: 116 / 170

Share
Download
Power One PODS 16.48-16000 1940 HEX Instruction Manual Download Page 116

E-6

PODS 16.48-16000 1940 HEX

Document number: 039247.fm

Revision: B

Surge arrestor kit, 3-phase (VAL-CP-3S-350/3+1) - 

E.3 AC Power source requirements

Failure to observe the above warning may result in hazardous conditions on the system that may cause 
injury to personnel.

E.4 Overview Surge arrestor kit

The surge arrestor kit protects the system against lightning and transient over voltage. Each surge arrestor 
kit consists of a holder containing three over voltage protector units, one spark gap and a cable harness.

WARNING! HIGH LEAKAGE CURRENT. ENSURE EARTH IS CONNECTED 

BEFORE CONNECTING MAINS SUPPLY

WARNING! PRIOR TO INSTALLING MAINS CABLING, ENSURE THAT THE 

SYSTEM IS ISOLATED FROM ALL AC MAINS SUPPLIES.

WARNING! ONLY A QUALIFIED ELECTRICIAN MAY CARRY OUT THE 

INSTALLATION.

Summary of Contents for PODS 16.48-16000 1940 HEX











































































































































































Reviews:

No comments