Power Hawk AUTO CRIB-IT AC-14 Instruction Manual Download Page 1

Rockaway, New Jersey  USA  

 

Rev F  3/2013 

 

 

 

 

 

 

INSTRUCTION MANUAL 

For 

MODELS AC-14 and AC-17 

 
 
 
 
 
 
 
 
 
 
AUTO CRIB-IT™

 Description 

CONGRATULATIONS on your purchase of the 

AUTO CRIB-IT™

!!...  the easiest and 

quickest vehicle stabilization tool on the market!  Lightweight and portable, this tool can 
be positioned and operated to automatically extend and stabilize vehicles in seconds.  
Use it for auto-extrication and other stabilization operations, up to a maximum load of 
2000 lbs for the AC-14 and 2800 lbs for the AC-17!  The 

AUTO CRIB-IT

 is patented and 

utilizes gas-spring actuated extender plates that automatically rise to engage the 
working material and lock into place.  Because the 

AUTO CRIB-IT

 is gas-spring-loaded, 

it will self-adjust upward and lock as weight is removed from the vehicle.   The 

AUTO 

CRIB-IT

 can also be placed completely under and parallel to rocker panels to avoid trip 

hazards.  Because the tool is made from high-strength aluminum and other metal parts, 
the 

AUTO CRIB-IT

 is easily decontaminated.  Its super compact design makes it easy 

to stow and can free up room for other vital equipment. 
 

 
 
 

Model AC-14 

Model AC-17 

Summary of Contents for AUTO CRIB-IT AC-14










Reviews: