Power-flo PFSPCPC Series, Owner'S Manual

Page: 5 / 16

5
Power-Flo Pumps & Systems • 877-24PUMPS • www.powerflopumps.com
Specifications
PFSPPPP33 Series Submersible Sump Pumps
Submersible Sump Pump
1-1/2” Discharge,
1/4” Spherical Solids
Wide Angle Tethered Float
& Manual Operation
Features:
General purpose pump for residential, light industrial and commercial
sump applications

DISCHARGE: 1-1/2” NPT Male, Vertical, 1-1/4” with Adapter

LIQUID TEMPERATURE: 32°-77°F

MOTOR HOUSING: Epoxy-coated aluminum alloy.

IMPELLER: Corrosion-resistant, reinforced Thermoplastic

PUMP BASE: Corrosion-resistant, reinforced Thermoplastic,
Top suction design filters debris and minimizes clogging.

SHAFT: Stainless Steel

HARDWARE: Stainless steel

GASKET: Rubber

SEAL: Single mechanical, rubber and stainless steel

UPPER BEARING: Single row, ball, oil lubricated

LOWER BEARING: Single row, ball, oil lubricated

POWER CORD: SJTW, 18AWG/3C Cord, with plug.

MOTOR: Energy efficient Permanent Split Capacitor (PSC), Oil
Filled, Class B insulation, Continuous duty (water depth must
be at least 6” to prevent motor from overheating), Auto reset
thermal overload protector, Circuit requirments 15 AMPS.

LEVEL CONTROL: Wide Angle Tethered, Mechanical, Normally
Open (N/O), reinforced thermoplastic, SJOW, 18AWG/2C,
10 Ft. cord w/ Piggy-back plug, On point - 14.2”, Off point - 5.9”
P/N: PFTFS10D1810P1

MANUAL: No float

WARRANTY: 3 year
MODEL HP Hz Volts/Ph RPM
FL
AMPS
Cord
Length
Wt.
PFSPPPP3328601T10 1/3 60 115/1 3450 7.6 10 ft 9 lbs
PFSPPPP3328601M10 1/3 60 115/1 3450 7.6 10 ft 7.9 lbs
HEAD in Ft
0 Ft 5 Ft 10 Ft 15 Ft 20 Ft 25 Ft Max
Lift
Max
Pressure
FLOW Gallon/Minute 60 57 50 42 32 17
28 Ft 12.4 psi
FLOW Gallon/Hour 3600 3400 3000 2500 1900 1000
PF
TYPE
U, SP, SW
Motor Housing
P, C
Impeller Type
P, C
Suction Plate Type
P, C
Motor HP
25, 33, 50, 75, 1
30 50
Voltage
1 or 2
Float Switch Type
M, F, T
Cord Length
10, 20
Power-Flo U = Utility
SP = Sump Pump
SW = Sewage Pump
P = Plastic
C = Cast Iron
P = Plastic
C = Cast Iron
P = Plastic
C = Cast Iron
25 = 1/4 HP
33 = 1/3 HP
50 = 1/2 HP
75 = 3/4 HP
1 = 1 HP
Shut Off
Head (ft)
Max Flow
(Gal)
1 = 115 V
2 = 230V
M = Manual
F = Fixed Vertical
T = Tethered
10 Ft
20 Ft
EXAMPLE: PFSPCPC3330501T10 - Power-Flo Pumps - Sump Pump - Cast Iron Motor Housing - Plastic Impeller - Cast Iron Suction Plate - 1/3HP - 30” Shut Off Head - 50GPM Max Flow - 115 Volt - Tethered Float - 10’ Cord