Power-Flo Pumps & Systems • 877-24PUMPS • www.powerfl opumps.com
9
Description
Submersible non-clog sewage pump designed
for typical raw sewage applications.
Series: PF6NC-H
30, 36, 48, 60HP,
1750RPM, 60Hz
Submersible Non-Clog
DISCHARGE
6” 125 lb., Flange Horizontal
LIQUID TEMPERATURE
104°F Continuous
MOTOR HOUSING
Cast Iron, Class 30
VOLUTE
Cast Iron, Class 30 with Bronze wear ring
IMPELLER
3 vane, enclosed type with pump out vanes on
back side, Dynamically balanced, ISO G6.3, Cast
Iron, Class 30
SOLIDS HANDLING
3” spherical
SHAFT
Stainless steel
SEAL PLATE
Cast Iron, Class 30
PAINT
Air dry enamel
SQUARE RINGS
Buna-N
HARDWARE
Stainless steel
SEAL
Double mechanical, Oil Filled pressure
equalized reservoir, Silicon Carbide outer seal
UPPER BEARING
Single row, ball, oil lubricated
LOWER BEARING
Double row, ball, oil lubricated
POWER CORD
25 Ft. Cord. Epoxy sealed housing with
secondary Pressure grommet for sealing and
strain relief.
MOTOR
Class F Insulation, Oil Filled
THREE PHASE
230/460 Volt. Dual Voltage. Requires overload
protection to be included in control panel
MOISTURE SENSOR
Normally open (N/O),
requires relay in control panel
TEMPERATURE
SENSOR
Normally closed (N/C),
requires relay in control panel
Specifi cations
PF6NC-H
Submersible Non-Clog Pumps
BACK TO INDEX
