Power-Flo Pumps & Systems • 877-24PUMPS • www.powerfl opumps.com
3
Specifi cations
PF6NC
Submersible Non-Clog Pumps
Description
Submersible non-clog sewage pump designed
for typical raw sewage applications.
Series: PF6NC
9, 12, 18, 24, 30HP,
1150RPM, 60Hz
Submersible Non-Clog
DISCHARGE
6” 125 lb., ANSI, Flange Horizontal
LIQUID TEMPERATURE
104°F Continuous
MOTOR HOUSING
Cast Iron, Class 30
VOLUTE
Cast Iron, Class 30
IMPELLER
Single vane, enclosed type with pump out
vanes on back side, Dynamically balanced, ISO
G6.3, Cast Iron, Class 30
SOLIDS HANDLING
3” spherical
SHAFT
Stainless steel
SEAL PLATE
Cast Iron, Class 30
PAINT
Air dry enamel
SQUARE RINGS
Buna-N
HARDWARE
Stainless steel
SEAL
Double mechanical, 1.875”, Type “K” U.S. Seal,
Oil Filled pressure equalized reservoir,
Inner Seal - Carbon/Ceramic/Buna-N
Outer Seal - Silicon Carbide/ Buna-N
UPPER BEARING
Single row, ball, oil lubricated
LOWER BEARING
Double row, ball, oil lubricated
POWER CORD
25 Ft. Cord. Epoxy sealed housing with
secondary Pressure grommet for sealing and
strain relief.
MOTOR
Class F Insulation, Oil Filled
THREE PHASE
230/460 Volt. Dual Voltage. Requires overload
protection to be included in control panel
MOISTURE SENSOR
Normally open (N/O),
requires relay in control panel
TEMPERATURE
SENSOR
Normally closed (N/C),
requires relay in control panel
Series: PF6NC
18, 24, 30, 36, 48, 60HP,
1750RPM, 60Hz
Submersible Non-Clog
BACK TO INDEX
