User Manual
Please read and understand all instructions
before use.Retain this manual for future reference.
8241408
4-Way 4 ft. Trailer Harness
V 3.0
SPECIFICATIONS
Type
Harness
End
Trailer
Pins
4
Receptacle
Flat
Wire Length
4 feet
Housing
Nylon Connections
Contents
Dust Cap, 16 gauge Wire
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before
using the product. The operator must follow basic
precautions to reduce the risk of personal injury and / or
damage to the equipment. Before allowing someone else
to use the product, make sure they are aware of all
safety information.
WARNING! The warnings, cautions and instructions
discussed in this instruction manual cannot cover all
possible conditions and situations that may occur.
Common sense and caution are factors that cannot be
built into this product, but must be supplied by
the operator.
NOTE: Keep this manual for the safety warnings,
precautions and operating, inspection and
maintenance instructions.
PERSONAL SAFETY
1.
Dress properly by wearing protective
equipment. Use foot, hand and head protection.
Always wear ANSI approved impact safety
goggles, which must provide both frontal
and side protection. Protect your hands with
suitable gloves. Protect your head from falling
objects by wearing a hard hat. Protective,
electrically non-conductive clothes and non-skid
footwear are recommended when working.
Wear steel-toed boots to prevent injury from
falling objects.
2.
Do not over reach; keep proper footing and
balance at all times. Proper footing and
balance enables better control of tools in
unexpected situations.
3.
Stay alert, watch what you are doing and use
your common sense. Do not operate any
machine or tool when you are tired, under the
influence of drugs, alcohol or medications.
ELECTRICAL SAFETY
1.
Disconnect the device from the power source
before servicing.
2.
Protect yourself against electric shocks when
working on electrical equipment. Avoid body
contact with grounded surfaces. There is an
increased chance of electrical shock if your
body is grounded.
CAUTION! A qualified electrician should perform
all wiring.
TOOL USE AND CARE
1.
Do not alter any parts of the product. All parts
and accessories are designed with built-in
safety features that may be compromised
if altered.
2.
Make certain that the power source conforms to
the requirements of your equipment.
3.
When wiring an electrically driven device, follow
all electrical and safety codes, as well as the
most recent Canadian Electrical Code (CE) and
the Canadian Centre for Occupational Health
and Safety (CCOHS).
4.
Always disconnect cables from the battery and
ground cable prior to repairs. Always reconnect
cable to the battery and the ground cable after
the repairs.
UNPACKING
1.
Carefully remove the product from the package.
a.
Retain packing material until you have
carefully inspected and satisfactorily
installed the product.
2.
Inspect the parts carefully to make sure the
device was not damaged while shipping.
ASSEMBLY
1.
Plug the 4-Way harness into the vehicle’s trailer
wiring connector.
2.
Secure any excess wire to the vehicle with
cable ties.
3.
Plug the 4-Way harness into the trailer’s
wiring connector.
4.
Turn the vehicle’s ignition to the “accessory”
position and visually check the light functions to
ensure connections are functioning properly.
NOTE: Applying a small amount of grease to the wiring
terminals helps to prevent corrosion.
MAINTENANCE
1.
Get optimal performance in extreme weather
conditions - apply electrical tape, thus
protecting and supporting the plug and wiring
from UV and salt.
2.
Maintain the product with care. A product in
good condition is efficient and will prevent
unnecessary problems.
3.
Inspect the product periodically. Have damaged
or worn components repaired or replaced by an
authorized technician.
4.
If the device does not operate, check all
electrical connections and ensure that they are
secure and free of dirt and grime.
NOTE: Locate wires on the vehicle by function. Colour
coding is not standard among all manufacturers.
DISPOSING OF THE TOOL
If your product has become damaged beyond repair, do not
throw it out. Bring it to the appropriate recycling facility.
For technical questions call: 1-800-665-8685
Visit www.princessauto.com for more information
