Power Electronics SD 300 Series, Getting Started Manual

Page: 42 / 354

SD300 POWER ELECTRONICS
40
RECEPTION, HANDLING AND TRANSPORTATION
5. RECEPTION, HANDLING AND
TRANSPORTATION
CAUTION
Read carefully the following instructions to ensure correct
mechanical installation.
Otherwise, the equipment can be damaged and lead to personal injuries.
Reception and Storage
The SD300 is carefully tested and perfectly packed before delivery. In the
event of transport damage, please ensure that you notify the transport
agency and Power Electronics: 902 40 20 70 (Interna34 96 136 65
57) or your nearest agent, within 24hrs from receipt of the goods.
Make sure model and serial number of the drive are the same on the delivery
note and unit.
Drive should be stored in a sun and moisture protected space and with an
ambient temperature between -20°C and +65°C, < 95 RH without
condensation. It is recommended not stacking more than two units.
Handling and Transportation
CAUTION
Handle the equipment carefully. Otherwise, the equipment can get
damaged.
SD300 is delivered horizontally in a cardboard box. Unpack the drive
carefully. Do not use sharp tools as they could damage the product. After
opening the package, please check the contained goods. Verify the item
numbers contained within the package with the packing inventory list. Please
5