NB City
POWER ELECTRONICS
34
COMMUNICATIONS
COMMUNICATIONS
The NB City charging point can be connected to the internet over the local network using an Ethernet cable
or Wi-Fi. It is also possible to connect via 3G / 4G mobile network thanks to the possibility of SIM card
integration. In addition, the device has Bluetooth technology for the initial configuration of the device
through the mobile application.
WARNING
Before opening any door, the equipment must be completely isolated, without any tension. Be
sure to follow the insulation guidelines and all safety instructions indicated in the "
section. Please use all the indicated PPE.
Otherwise, you may get an electric shock.
Wi-Fi communication
Wi-Fi network communication is designed to facilitate user access to the charger. This connection
requires the device and the user connected to the same Wi-Fi network. Once configured, the user can
start a charging session through the mobile application.
Ethernet connection
The Ethernet connection allows accessing the parameters of the equipment through applications
commonly used by the
back office
. This use is mainly focused on maintenance and configuration. The
Ethernet connection has been indicated in the "
" section.
Bluetooth connection
Bluetooth is one of the connections that includes the equipment in standard mode. This system allows
access to the charger from a nearby point when the system does not have alternative networks and
communicate through the mobile application to perform a charge or an initial user configuration.
9
