background image

User Guide & Warranty

750W JIGSAW WITH LASER

After Sales Support

Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.

In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your

enquiry by email ([email protected]). Do not forget to include your name, address and a

daytime telephone number.

Alternatively, you can contact our freephone service hot-line on the number given below.

Office hours are as follows:

Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm

UK / NORTHERN IRELAND HELPLINE: 

0870 7323023

REPUBLIC OF IRELAND HELPLINE: 

1800 481005 

WEB SUPPORT:

www.omegawolf.com/powercraft

Omega, Interex House, Prospect Close, Lowmoor Business Park

NG17 7LF Kirkby In Ashfield, England

Replacements or repairs under guarantee regulations are free of charge.

GB/IRE-0706-11

Name:

Address:

Contact Telephone No.:

E-mail:

Location of purchase:

Fault Description:

If you are requested by the manufacturer to return the item for 

repair please complete the enclosed section and send it together

with your product and your receipt (proof of purchase) to the

service address shown below.

750W JIGSAW WITH LASER

PS-750L

AFTER SALES SUPPORT

UK / N.IRELAND HELPLINE NO

0870 7323023

REP. IRELAND HELPLINE NO

1800 481005

WEB SUPPORT

www.omegawolf.com/powercraft

MODEL NUMBER: PS-750L

Summary of Contents for PS-750L













Reviews: