power automation PA 8000 LW Series, Installation Instructions Manual, Page: 9 / 132

1.3 Limitation of liability
All information and notes in this installation manual were compiled
under due consideration of valid standards and regulations, the
present status of technology and our years of knowledge and experi-
ence.
Power Automation can not be held liable for damage resulting from:
n disregarding this installation manual
n unintended use
n employment of untrained personnel
n unauthorized conversions
n unauthorized modifications to the software
n technical modifications
n use of unapproved spare parts
n use in conjunction with machines not deemed compatible by
Power Automation
In case of customized versions the actual scope of delivery can vary
from the explanations and representations in this installation manual,
because of the utilization of additional options or due to the latest tech-
nical changes.
Apart from this, the obligations agreed upon in the delivery contract,
the general terms and conditions, and the delivery conditions of Power
Automation and the legal regulations valid at the time of contract apply.
We reserve the right to make technical modifications in order to
improve usability.
1.4 Copyright
This installation manual is protected by copyright law.
Passing this installation manual on to third parties, duplication of any
kind – even in form of excerpts – as well as the use and/or disclosure
of the contents without the written consent of Power Automation is not
permitted.
Violations oblige to compensation. The right for further claims remains
reserved.
1.5 Warranty terms
The material warranty terms are provided in Power Automation's terms
and conditions as well as inside the sales documents.
Liability
Copyright
Material Warranty
PA 8000 LW CNC control unit
General information
25.09.2015 | 9