power automation PA 8000 LW Series, Installation Instructions Manual, Page: 14 / 132

2.2 Personnel requirements
2.2.1 Qualifications
Danger of injury in case of insufficient qualification!
–
Only those persons who have been specified in the corre-
sponding chapters of this installation manual should be
entrusted with the listed types of work.
– Employ certified experts, if in doubt.
Improper operation can lead to severe personal injuries and/or
material damage.
The following qualifications are specified for different areas of activity
listed in the installation manual.
Instructed person
was instructed by the operating company about the duties assigned to
her/him and the possible dangers that may arise from inappropriate
conduct.
Qualified personnel
are able to carry out assigned work and to recognize possible dangers
due to professional training, knowledge, and experience as well as
profound knowledge of applicable regulations.
Skilled electrician
A skilled electrician is able to carry out assigned work and to recognize
and avoid possible dangers due to professional training, knowledge,
and experience as well as profound knowledge of applicable
regulations.
The skilled electrician has been trained specially for his working envi-
ronment and he has profound knowledge of relevant standards and
regulations.
2.2.2 Unauthorized persons
Danger for unauthorized persons!
–
Keep unauthorized persons away from the working area.
– If in doubt, address such persons and ask them to leave the
working area.
– Interrupt your work as long as unauthorized persons are in
the working area.
Unauthorized persons, who do not meet the requirements
described in this installation manual, are not aware of the dan-
gers in the working area.
Only persons who are expected to perform their tasks reliably are per-
mitted as personnel. Persons whose reaction capability is impaired,
e.g. through drugs, alcohol or medication are not permitted.
L
WARNING
L
WARNING
PA 8000 LW CNC control unit
Safety
25.09.2015 | 14