power automation PA 8000 LW Series, Installation Instructions Manual, Page: 110 / 132

The following general rules apply:
Personnel: n Qualified personnel
Protective equipment: n Ground strap
n ESD safety shoes
n ESD safety pad
n ESD clothing
n Protective glasses
n Ear protection
n Antistatic gloves
1.
In the event of faults that pose immediate danger to man or
machine, activate the emergency shutoff function immediately.
2.
Determine the cause of the fault.
3.
Disconnect the control unit from the power supply.
4.
Immediately inform the person in charge of the equipment where
the fault is located.
5.
Depending on the type of fault, eliminate the fault or have it
eliminated by an authorized specialist.
8.2 Malfunction indicators
The following components indicate malfunctions or improper configura-
tion of the control unit.
Module Description
4AXLX LEDs The LEDs of the 4AXLX module
indicate operating states and
malfunctions regarding analog
axes inputs and outputs.
2416 EL LEDs The LEDs of the 2416EL module
indicate operating states and
malfunctions regarding digital
inputs and outputs.
In Case Of Faults
Overview
PA 8000 LW CNC control unit
Troubleshooting
25.09.2015 | 110