power automation PA 8000 LW Series, Installation Instructions Manual, Page: 106 / 132

6.3 Storage
Store packages under the following conditions:
n Do not store outdoors.
n Store in a dry and dust-free environment.
n Do not subject to aggressive media.
n Protect against direct sunlight.
n Avoid mechanical vibrations.
n For storage periods longer than 3 months check the general condi-
tion of all parts and packaging regularly.
n If necessary renew the packaging.
Property Value Unit
Temperatures -20 - +60 °C
-4 - +140 °F
Humidity (non-condensing)
<
80 %
Acceleration
<
4.0 G
Additional requirements
Packages may be marked with notes for storage, which may exceed
the requirements mentioned here. These must be adhered to.
Improper storage can result in damage!
Improper storage can cause extensive material damage.
n
Always store the control unit in its original packaging.
n When storing the control units observe the specifications regarding
maximum and minimum storage temperature and permitted max-
imum acceleration given in chapter "Technical data" (
Ä
Chapter 4
“Technical data” on page 83 ).
Storage Of Packages
Storage Conditions
Improper Storage
L CAUTION
PA 8000 LW CNC control unit
Transport, packaging and storage
25.09.2015 | 106