Powered by Safety
®
41
Maintenance
IB-60201
Table B Lubrication
Location
Reference
Figure
Lubricant
Method
Electrical Parts
Primary Disconnecting Device
Figure 21, b
Mobilgrease 28 Wipe clean. Apply lubricant only to actual contact surface.
Ground Connection
Figure 22, x
Mobilgrease 28 Wipe clean. Apply lubricant only to actual contact surface.
Secondary Disconnect
Receptacle
Figure 21, g
Mobilgrease 28 Wipe clean. Apply lubricant only to actual contact surface.
Mechanical Parts
Spring Yoke Pin
Figure 21, a
Anderol 456 Oil
Primary Trip Prop Bearing
Figure 21, c
Anderol 456 Oil Remove main closing spring.
Trip Shaft Bearing
Figure 21, d
Anderol 456 Oil
Fundamental Linkage Pin
Figure 21, e
Anderol 456 Oil Apply to penetrate where pin passes through end link.
Jackshaft Support
Figure 21, f
Anderol 456 Oil
Pawl Support Arm
Figure 21, i
Anderol 456 Oil
Crank Pin
Figure 21, h
Anderol 456 Oil
Motor Drive Shaft Roller Needle
Bearings
Figure 21, m
Anderol 456 Oil
Pawls
Figure 21, k
Anderol 456 Oil
Close Latch Shaft Face
Figure 21, n
Rheolube 368A
Grease
Apply a light coating of grease and remove all excess.
Ratchet Wheel
Figure 21, l
Rheolube 368A
Grease
Jackshaft Lever Pins passing
through Operating Pushrods
Figure 21, j
Anderol 456 Oil Avoid lubricating on operating pushrods.
Main Closing Spring Guide Rod
Figure 22, o
Anderol 456 Oil
Racking Mechanism
Figure 22, p
Anderol 456 Oil
Rheolube 368A
Grease
Apply Anderol 456 Oil to the crank arm rollers and racking
crank arms. Wipe clean. Apply Rheolube 368A Grease to worn
gear.
Primary Trip Prop Roller
Figure 22, q
Anderol 456 Oil Remove main closing spring.
Secondary Linkage Roller
Figure 22, r
Anderol 456 Oil Remove main closing spring.
Primary Trip Prop
Figure 22, s
Anderol 456 Oil
Open-Close Flag Drive Lever Pin
at Jackshaft
Figure 22, u
Anderol 456 Oil
Flag Support Pin
Figure 22, v
Anderol 456 Oil
Jackshaft Outer Bearing Support Figure 22, w
Anderol 456 Oil
Motor Drive Shaft Coupling
Figure 22, z
Anderol 456 Oil
Wheel
Figure 22, ad Anderol 456 Oil
Motor Drive Shaft Support
Bearings
Figure 22, ab Anderol 456 Oil
Camshaft Needle Bearings
Figure 22, aa Anderol 456 Oil
Close Shaft Support Bearing
Figure 22, y
Anderol 456 Oil
Motor Cutoff Cam
Figure 22, ac
Rheolube 368A
Grease
Apply to peripheral surface only.
Fundamental Linkage
Figure 22, t
Anderol 456 Oil Apply to penetrate where pins pass through lines.