- 32 -
0800-GB Sämonitor_837
MULTiTrOniC
GB
1)
Only for AEROSEM, TERRASEM
User the Interface of the Multitronic II – Sowing Monitor
1
2
4
5
7
6
8
9
Button indication:
F-key
- Activating the main menu
- Activating the help functions (sensor test, calibration
help)
- Saving the machine settings
Arrow keys
- Changing the menu settings
- Menu navigation (up/down)
Display Drive Speed
Press 1x = Drive Speed Display
Display Hectare Meter
Press 1x = Displays Sub-total hectare meter
Press 2x = Displays Total hectare meter
Reset Sub-total hectare meter = press both arrow keys
and
for 2 seconds
Reset both hectare meters = both arrow keys
and
for 10 seconds
Display Rotations
Press 1x = Displays Sowing shaft rotations
Press twice to display fan unit turning speed
1
)
Display Tramlining Cycle and Tramlining
Rhythm
The tramlining cycle and rhythm are displayed.
Left:
Tramlining Cycle
right:
Tramlining Rhythm
(current row)
Switching the tramlining cycle:
The tramlining cycle is switched automatically using sensors or
pressure switches.
Manual corrections can be made during automatic counting:
The tramlining cycle may be corrected using the arrow keys
or
.
If automatic switching is disabled, the tramlining cycle may also
be switched manually using the arrow keys
or
. (e.g.
when driving around obstacles)
Press 2x = Displays <AUS>
LED on = Tramlining switched on
LED off = Tramlining not switched on
Leaving the main menu:
You can exit the main menu at any time by pressing one of the
four display pushbuttons.
To save settings:
Keep the F key pressed for 6 sec.
The display will start flashing after 2.5 sec
An acoustic signal will sound after 6 sec.
When the sound stops, the setting is saved.
The F key can be released.
If the F key is released any earlier, the old setting will be
retained.
Note!
• For detailed Operating Instructions for the Multitronic Sowing
Monitor see Appendix of these Operating Instructions.
• When driving on public roads, disconnect all electronic equipment
from the on-board power supply (disconnect plug on tractor
side).
Display
F-Key (Function Key)
+ Arrow keys
Drive Speed
Hectare meter
Sowing shaft rotation
Tramline
LED
