- 58 -
2200-EN TECHN. DATA_2740
Technical daTa
EN
Connections required
• 1 single-acting hydraulic plug connection with floating
position (operating pressure at least: 150 bar / max.:
200 bar
• 1 double-acting hydraulic plug connection
• 7-pin connection for the lighting system(12 volt)
• with single rotor operation: 2-pin connection (12 volt)
Optional equipment:
• Swath apron
• 16" outer feeler wheel
• 16" spare wheel for rotor chassis
• Flow divider
• Tine covering
Variations:
• mechanical operation (rope pull)
• electro-hydraulic single-rotor operation
• hydraulic rake height adjustment (with/without
hydraulic external feeler wheel)
• Air brake
• Hydraulic brake
• inside mounted rigid feeler wheel
• internal feeler wheel steerable
• Flow Tast skids
• hydraulic weight alleviation
Designated use of the swath rotor
The swath rotor is designated for customary use in
agricultural work.
• To rake green and coarse fodder, wilted silage and
straw.
Any other uses outside of these are regarded as not in
accordance with the designated use.
The manufacturer is not liable for any damage resulting
from this. The user alone accepts full responsibility for
any resulting machine damage.
• Use as designated also includes observance of the
manufacturer's stipulated maintenance and repair
conditions.
Type plate
The chassis number is engraved on the type plate shown
opposite. Guarantee claims, enquiries and spare parts
orders cannot be processed without the chassis number.
Please enter the number on the title page of the Operating
Instructions immediately upon taking delivery of the vehicle/
equipment.
Type plate position
The type plate (1) is attached to the front of the unit, on
the frame after the headstock, on the right in the direction
of travel.(see image)
1
