EN
TransporT
2200_EN-TRANSPORT_2740
- 32 -
5. Check that the transport safeguard is correctly locked.
(See image). The bolt must have engaged in the locking
hooks.
TIP
When parking the machine: Set control units 1 and 2
to floating position to make uncoupling the hydraulic
hoses easier.
From headland to transport position
075-09-38
Raising the rotors
TIP
Only with hydraulic rake height.
Lowering and raising the rotor is only possible if the
comfort control on both rotors is set to the working width.
1. Release working width adjustment (position 2) by
actuating control unit 2 (double-acting).
3
2
1
2. Swivel the rotor arms from headland to highest position
by simultaneously:
a. Skipping the headland safety device by pulling the
rope or pressing the comfort-control button (single-
rotor control variant).
b. Setting control unit 1 (single-action) to "Raise". Move
the control unit to the cylinder stop.
3. Lower the rotor to transport height by setting control
unit 2 (double-acting) to "Lower" until the cylinder has
reached the limit stop.
TIP
In transport position, you can ignore the "min." display on
the slotted link (1). The slotted link indicator is only relevant
in the working position. It refers to the working width.
4. Check that the transport safeguard is correctly locked.
(See image) Check. (See image). The bolt must have
engaged in the locking hooks.
TIP
When parking the machine: Set control units 1 and 2
to floating position to make uncoupling the hydraulic
hoses easier.