(981) 0000-GB VOREINSTELLUNG
GB
PRESETTING THE PLOUGH
- 10 -
Before driving to the field
SERVO
1. Carry out basic setting according to
table C
.
2. Carry out a more accurate setting when in use.
SERVO NOVA
1. Carry out basic setting according to
table A
.
2. Carry out a more accurate setting when in use.
Set furrow width
- Loosen both hexagonal screw (SK).
- Remove rear hexagonal screw.
- Swivel anchoring console until the required furrow width is obtained
and the hexagonal screw fits into one of the borings (1, 2, 3, 4, 5).
- Retighten hexagonal screws.
Setting both the spindles (ZP, VF)
Drawing point (ZP)
Backfurrow (VF)
• Setting depends upon the inside distance between the tractor
wheels (RA) and the set furrow width (1, 2, 3, 4, 5).
- Further Information on the drawing point and backfurrow in
chapter "OPERATION"
.
RA
TD65/92/35
Table-C
for
SERVO
Table-A
for
SERVO NOVA
TD 82/96/18
VF
ZP
2
1
3
4
5
SK
