0900-GB_SCHLEPPER VORAUSSETZUNG_2441
GB
- 8 -
TRACTOR REQUIREMENTS
Tractor
To operate this machine the following tractor requirements are
necessary:
- Tractor power: from 52 kW / 70 hp
- Linkage:
lower link cat. II
- Connections: see table “Necessary hydraulic and power
connections”
Ballast weight
The front of the tractor is to have sufficient ballast to guarantee braking
and steering abilities
At least 20% of the tractor’s tare weight on the front
axle!
Lifting gear (Three-point linkage)
- The tractor’s lifting gear (three-point linkage) must be designed for
the occurring load (see technical information).
- The lifting struts are to be set at the same length (4) using the relevant
adjusting equipment
(See the tractor manufacturer’s operator’s manual)
- If the lifting struts on the lower linkage can be fixed in various
positions, then select the back position. this will relieve the tractor’s
hydraulic unit.
- The limiting chain or lower link stabilisers (5) are to be set so that
the coupled implement CANNOT move sideways. (Safety measure
for transportation)
Hydraulic positioning control on the lifting gear
The lifting hydraulics are to be switched to positioning
control when:
- transporting
- coupling and uncoupling the machine
- the control has been switched off.
20%
Kg
371-08-16
371-08-16
