Pottinger s Series, Operator'S Manual

Page: 26 / 66

- 26 -
0900_GB-ISOBUS-Terminal_2441
GB
ISOBUS - TERMINAL
Start menu
T1 STOP
T2
Work-menu
T3 Set-menu
T4 Information -Menü
T5 Test-menu
STOP button function
To stop all procedures currently running
ESC button function:
To return to previous menu
Work menu
T1 Display of stored values (working width, working height)
T2 Load working height (press SHORT button)
Save current working height (press LONG button)
T7 Lift all rotary units to transport position
T8
Lower all rotary units to off-road transport
T9 Load working width (press SHORT button)
Save current working width (press LONG button)
T10 Change to page 2 (switch to mask (F3))
T1...T3 Preselect – rotary units
T4
Change to page 3 (switch to mask (F4))
T7 Lift preselected rotary units from working to off-road transport
position
T8 Lower preselected rotary units from off-road to working
position
T9
Decrease working width of preselected rotary units
T10 Increase working width of preselected rotary units
Adjusting swath width (rear working width):
Only mark rear rotor (see F3) and set swath width with button
(T9 / T10)
T1...T4 Preselect – rotary unit(s)
T7 Lift raking height of preselected rotary unit
T8 Lower raking height of preselected rotary unit
T9 Load working height (press SHORT button)
Save current working height (press LONG button)
T10 Set current working height to “0” and save
Button indication
T1
T2
T3
T4
T5
F1
T7
T8
T9
T10
T1
T2
F2
F4
T7
T8
T9
T10
T1
T2
T3
T4
T7
T8
T9
T10
T1
T2
T3
T4
F3