- 14 -
0800-GB Abbau_2441
GB
DISMOUNTING THE MACHINE
Uncouple / Park the machine
Danger!
Securely support
raised machine
before carrying
out any work
under on it -
Danger of injury
Only work on the
machine with the
drive and motor
turned off
Attention!
Park the machine
only on even firm,
ground – Stability!
The machine can be lowered both from the
working position and from the transport
position.
• Shut off the engine and remove the ignition key.
• Put lever (ST) on the control unit into the floating position
(0).
Variant: Power control / ISO bus
With the control panel switched on,
press “Transport position” button to
reduce any existing line pressure in
the machine’s hydraulics.
This makes connecting replacement
hydraulic lines easier.
• Close all stop valves(pos. A)
(only for machines without operating device)
• Disconnect hydraulic lines from tractor.
• Remove pull rope from tractor cabin.
- Place the electro-cable and hydraulic lines in hose
holder receptacle
• Swing jackstand down
- Disengage spring loaded bolt (B)
- Swing jackstand (5a) down and lock into place
• Disconnect cardan shaft (4)
• Firmly apply handbrake (1)
• Disconnect brake lines
Machines with air brakes
• Disconnect air hoses from tractor:
- disconnect red hose coupling first
- then yellow hose coupling
Machines with hydraulic brakes
• Disconnect hydraulic brake hose from rapid action
coupling on tractor
• Secure machine against rolling with wheel chocks
• Disconnect lower link
• Move tractor carefully away
3
1
4
5
