- 9 -
1800-Gb ApplicAtion_3751
AttAching to trActor
EN
•When the implement is engaged then there is
insufficient casing to over the drive shaft.
• The maximum angle of deviation of the universal-joint
will possibly be exceeded (see Supplement B also).
In this case an accessory kit is necessary which
positions the implement approx. 200 mm forward.
In a case such as this please contact our Customer
Service Dept.
Fenders and protective cloths
DANGER
Danger to life - due to rotating or hurled components
•
Before starting work, check the protective
devices for function, correct position and
condition.
•
Fold down the guards before starting work.
•
Replace defective protective devices imme-
diately.
•
Manipulation or improper use of the safety
devices is not the responsibility of the man-
ufacturer.
•
Do not enter the protective device as this will
damage it.
DANGER
Danger to life - due to rotating or hurled components
•
Switch off the cutter bar drive.
•
Wait for the cutter bars to come to a stand-
still before swivelling up the fenders and
protective guards.
Mudguards and protective cloths must be folded down
before switching on the unit (= brought into working position).
For maintenance work or when parking, the mudguards
and protective cloths can be lifted.
Lift-up
1. Loosen locking mechanism (1) and swing protection
(2) up.
1
2
2. Engage protective frame in holder (3)
3
Hydraulic side protection
CAUTION
Risk Risk of minor or moderate injury from squeezing
the belt tensioner.
•
Pay special attention when moving the side
guards.
•
Do not touch the danger area.
•
Instruct other persons to leave the hazard
area
As an option, the side guards can be swivelled hydraulically
with the control valve on the tractor.
This would eliminate the necessity of releasing or latching
a locking device.
