Change belt tension for shorter belts
• Loosen screws (8)
• Adjust using screw (9)
• When assembling, tighten screws (8) with 85 Nm.
126-16-112
8
9
Main drive belt tension: (G,H)
H
SE
224-16-04
Check belt tension:
• Basic setting (SE): 183mm
Changing belt tension:
• Adjust screw (H)
Replacing belts at the main drive:
When the driving belts show signs of damage or wear, they
must be replaced.
(Note: Always replace the complete
belt set!)
• Remove upper and lower cover. To do this, remove the
screws 10-15, see illustration.
224-16-04
10
11
12
13
15
14
• Loosen belt tension. To assist in this, the belt tensioner
can be deactivated using the blade quick-change wrench
(16).
224-16-03
16
• Replace belt
• Restore belt tension
• Re-tighten upper and lower cover (6x screws see
illustration)
- 32 -
1800-GB_Tine condiTioner_3751
RolleR conditioneR
EN
