Detaching and attaching the conditioner
The mower unit is designed for the attachment of either
a tine conditioner, a roller conditioner or a swath former.
Special work steps are necessary when changing from
one machine to another.
For details see the Section “REPLACE CONDITIONER”
Rotor tines:
1. Replacing tine fixings
If signs of strong wear are found on the tine fixings, then
the affected component(s) must be replaced. (tines, screw,
clamping sleeve, ...)
2. Rotor tines position
Pos. Z1: Rotor tines position for normal operating conditions.
Pos. Z2: For difficult conditions of use, if e.g. the fodder
wraps around the rotor.
Turn the rotor prongs 180° (pos.Z2). This tine position
solves the problem in most cases. However, this lessens
the conditioning effect to a certain extent.
- 25 -
1700-GB_Tine condiTioner_3751
Tine condiTioner
EN
