- 23 -
1700-GB_Tine condiTioner_3751
Tine condiTioner
EN
Set swath width:
The swath boards deposit the cut and conditioned fodder
in the desired swath width. You adjust the swath plates left
and right by opening and setting the adjustment screw in
an identical way (S)
S
Setting the position of swath and guide plates
NOTE
Property damage through the swath and guiding
plates being too narrowly set. This can lead to:
- increase in power required
- machine clogging
-
V-belt damages
•
Check the setting and if necessary set the
swath and guiding plates to be wider
The settings listed below should be taken as basic settings.
Due to the different types of forage, an optimum setting of
the guide plates can possibly only be determined during
practical application.
Wide spreading
- Swivel the swath plates (S) completely out
- Position (B)
278-09-52
B
Swathes
- Swivel the swath plates (S) in
- Position (L)
278-09-53
L
Operation
DANGER
Life-threatening danger exists through parts being
thrown out.
•
Make sure that third parties also keep a
sufficient safe distance from the running
engine.
Driving speed:
Adapt the speed to fodder consistency. Travelling too fast
reduces conditioning quality and evenness.
Working without a conditioner:
If necessary, the tine conditioner can also be detached and
replaced with a roller conditioner, or swath former. (Contact
your sales partner for more information.)
A machine with a conditioner as a complete unit is fitted
with the proper safeguards. Should the conditioner be
removed then the mower unit is no longer a completely
safeguarded. In this case, mowing must not take place
without fitting additional safeguards!
