- 14 -
1801_Gb-AlphaMotion_3751
EN
Transport position
- The mower must always be locked during transportation.
- Pivot Flap (F) to "Pos 1"
K
Pos 1
- Close stopcock (Pos. A)
Pos.
E
Pos.
A
Mounting
- see chapter “Attaching with quick couplings”
- Couple the hydraulic lines for lifting cylinder on the
single-acting (SA) hydraulic circle of the tractor.
EW
T
P
T
021-06-04
- Open shut-off valve (pos. E)
- Raise the mounting frame (MF) over the tractor’s lifting
gear
Pos.
E
Pos.
A
- Fold away the flap (F) to the front (Pos.2).
K
Pos 2
General safety information
NOTE
Risk of material damage due to collisions between
the mower and the environment.
•
Lock the mower before transport.
WARNING
Risk of injury resulting in death or other serious
injury if the unit is tilted..
•
Park the implement on flat, solid ground.
CAUTION
Risk slight or moderate injury to double-acting
tractors Front linkage
•
Do not exceed the maximum lowering depth
of the mower unit! This results in inadmissi-
bly high pressure on the boundary chains,
which can burst. In the most unpleasant
case, this will result in injuries to persons in
the danger area around the mower.
Parking position
- Pivot upwards (Pos 0) the The Flap (F) to park the
mower.
K
Pos 0
A
- Close stopcock (Pos. A)
Pos.
E
Pos.
A
TIP
It is only possible to remove a conditioner if flap (F) is
in position 0.
mounting unit "alpha motion"
