- 13 -
9200 GB GWsIchErunG (873)
GB
OVErLOaD CUT-OUT
Cam clutch function
The cam clutch switches the drive off when it becomes overloaded.
The switched off clutch can be switched on again by uncoupling the p.t.o.
drive.
Take note!
Sensible operation prevents frequent clutch response and preserves against
unnecessary wear and tear.
Cam clutch adjustment
The factory setting is 180 daNm. This corresponds to a setting of
L = 126.5 mm.
Dismantling the cam clutch
- Only dismantle clutch when locking cam is engaged (E).
- Note fitting position of locking cam (SN) when dismantling.
- Remove spring bolt (F).
Take note!
Both compression springs on the spring bolt must be equally tensioned
firmly.
