HITCHING
GB
300-GB Anbau_218
- -
Connecting hydraulic system to the tractor
For reasons of accident prevention the p.t.o. must
be switched off and the rotors must come to a stand
still before raising the side rotors.
- Only connect hydraulic system to the tractor when stopcock is
closed (position A).
Note
• Hydraulic line L1 is available in every model.
• For machines with hydraulic wheel adjusting equipment it
is necessary to have a second simple functioning hydraulic
connection on the tractor. The two-way stopcock (H2) is connected
to this.
• If the tractor only has one hydraulic connection, then instead
of a two-way stopcock (H2), a three-way stopcock (order no.
445.059) and the plug (order no. 448.051) which goes with it can
be fitted.
This means any individual hydraulic circuit can be selected.
with this connection variation, the backflow choke
valve (D) may not be removed.
Position A:
Stopcock closed.
Position E1:
Swivelling of outer rotors.
Position E2:
Swivelling of wheels.
TD12/3/1
L1
H2
A
E
D
TD12/3/1
.0
.01
L1
D
L1
