- 61 -
0800_GB-Wartung_1612
GB
MainTenance
Adjusting measurement for end switch
The adjustment is made with tailgate closed as well as with cutter bar swivelled in.
End switch for tailgate:
X = 6 mm
End switch for automatic loader (up):
X = 5 mm
End switch for cutting unit:
X = 6 mm
End switch for scraper floor:
X = 6 mm
(with regulating fittings)
R.p.m sensor (Hall sensor)
- 5 mm
Maintaining electronic parts
• Protect operating unit (1) from water.
- Do not leave in the open
- Store in a dry area when not in use for longer
periods
• Cleaning the operating unit (1)
- Use a soft cloth and mild household cleaner
- Do not use solvents
- Do not put operating board into liquid!
• Cleaning the job calculator (2)
- Do not spray job calculator with a high pressure
cleaner
2
1
